How to deal with the failure of the swing gate during the ticket checking process?

The main function of the swing gate is to apply to the entrance and exit management. It is installed in many places, not limited to places with a lot of people. However, it is also common for the swing gate to show a malfunction, for example. During the ticket checking process, there is a high probability that the swing gate will fail. How to deal with it? Ticket gate

1. After checking the ticket at the swing gate or swiping the card, it is not allowed to enter. This situation is due to the fact that pedestrians resisted the rotating rod when checking the ticket or swiping the card, so that they cannot enter. The solution is to let the consumer take a step backwards in the swing gate. Then just enter it; if this is not the case, it is necessary to check whether the electromagnet is normal, if the operating part has the voltage output of the electromagnet, and the voltage is normal, but the electromagnet cannot be sucked up , Indicating that the electromagnet has a problem, at this time it is only necessary to replace the electromagnet. Ticketing software

2. There was no response when the card was swiped. At this time, it is necessary to check whether the ticket used is the ticket of this system, and whether the method of checking the ticket is appropriate; then check whether the connection of the SD card reader is normal. If it is a barcode ticket, it is also necessary to check whether there is any When the card was installed, the insert was reversed; then check whether the connection of the card reader module is normal, whether the viewing angle of the bar code reader is accurate, etc.; also check whether the open board of the function key is normal; this may promote the swing gate At the time of swiping the card, it does not show everything that reflects the situation. Consumer turnstile