Five common channel gate fault solutions?

As an intelligent machine, the channel gate will inevitably encounter various problems in the process of use. Here are some common problems analyzed and explained. It is hoped that it will be convenient for the operation units of the gates of the wide passage to do daily maintenance.

1. After swiping the card or checking the ticket at the gate of the passage, you cannot enter

Solution: (1). Perhaps the pedestrian has withstood the rotating rod when swiping the card or checking the ticket. Please take a step back and enter. (2) Please check whether the electromagnet is normal. If the voltage of the electromagnet is output in the control part, and the voltage is normal, but the electromagnet cannot be picked up, just replace the electromagnet. Anti-collision pedestrian swing gate

2. The turntable of the channel gate swings up and down

Solution: (1) The tray of the movement turntable is loose, and the gap between the fits is too large. (2) The tray screws are loose.

3. There is a single gate that passes through and drops the bar

Solution: (1) The position of the pole drop solenoid is not installed properly. (2) The power supply problem, the voltage is not working. Anti-collision bridge swing gate

4. The gate is powered off but does not drop the pole

Solution: (1) Check whether the position of the electromagnet is correct, and the spring force of the solenoid bracket is too small. (2) The friction between the turntable and the rotating rod is too large.

5. The check-in gate sometimes fails to draw the card smoothly

Solution: (1) The two iron sheets at the ticket insertion area of the gate with the punch-in function need to be polished smoothly to reduce the resistance of ticket insertion. Anti-collision access control swing gate

Regarding other application problems of smart channel gates such as three-roll gates, wing gates, swing gates, and turnstiles, if there are other difficult-to-solve problems in handling, you can contact our technical customer service.