Inclined swing gate for flat face machine

Product name: Inclined swing gate for flat face machine

Main material

Box: SUS304 original brushed snow sand stainless steel

Movement: 45# steel + electroplated color zinc

Door body: Acrylic (optional stainless steel)

Frame: stainless steel or cold rolled plate

Movement performance

Transmission mode: imported brand DC motor

Safety mode: barrier-free access after power failure

Power-assisted drive: motor drive

Door opening method: telescopic inside and outside the box

Reset method: automatic reset

Door opening direction: single/two-way (factory setting)

Channel width: standard 550-850mm

Equipment noise: ≦52db; door opening and closing ≦55db

Passing speed: 35 people/min in normally closed mode; 60 people/min in normally open mode

Movement life: 5 million times

Features

Adopt exclusive technology, non-destructive mechanical structure, fully automatic movement, modular design, anti-rust and anti-corrosion treatment on the surface of the movement, durable; inclined face swing gate

The door will be closed automatically when power is on, and the door will be opened automatically when the power is off, and has a self-check function; (can control the remote door to close or use a ticket card to control)

The core processor of the main board of the turnstile adopts automotive grade, which has fast start-up speed and stable performance against high bottom temperature;

With automatic reset function, the gate will automatically return to the closed state if there is no pass within the effective time of opening the gate (preset 8 seconds) (can be connected to cancel the pass function to improve the pass efficiency);

Imported DC motor, stable performance, fast starting speed, soft and silent action;

Standard 5 pairs of infrared, maximum support 26 pairs of infrared detection. Face recognition swing gate

Super logical judgment, accurate anti-tailing, zero-distance detection and anti-tailing alarm, leading the industry

The ticket checking controller adopts industrial-grade ARM9, embedded wince system, open development platform, and reserves unlimited upgrade requirements;

Support multiple display output interfaces of RS232, VGA, LVDS;

Support real person voice prompt function (can prompt all kinds of ticket information)

Adopt industrial-grade switching power supply to ensure the stability and reliability of the power supply system;

The ticket inspection control is directly connected to the main control of the gate, and there is no delay requirement;

The ticket control board has 5 USB ports and 5 RS232 serial ports;

Independent dual-core power supply circuit to ensure the stable operation of the system;

10m/100m self-adaptive network interface, effectively improve the speed of ticket inspection; flat face machine swing gate

Electrical and environmental

Voltage: 110V to 240 V AC (wide power input voltage)

Frequency: single phase 50Hz to 60Hz

Working voltage: DC24V

Current: static 300mA; dynamic 3A (maximum working current)

Operating temperature: -20 to 70°C

Storage temperature: -40 to 80°C

Relative humidity: 5% to 95% in non-solidification state

Waterproof and dustproof: system level IP41 / electrical part IP65