Arc speed gate

Product name: Painted in the middle of the arc speed pass door

Made of stainless steel, high temperature resistance, corrosion resistance, beautiful and generous appearance, full computer numerical control laser cutting, hole opening, mechanical wire drawing process, one-time forming technology

technical parameter:

Product model: RS--ST002

Structure: SUS304 stainless steel

Process standard: laser cutting, machine polishing, wire drawing treatment

Box size: length 1400*width 120*height 980MM

Channel width: within 600-800mm

Movement voltage: DC24V

Control signal: switch signal

Side indicator: optional

Swipe valid reminder light: located in the center of the cover

Passing speed: 30-45 person-times/min

Reading head installation position: 2

Control board installation position: 1

Gate opening and closing time: about 0.5-1.5 seconds

Ambient temperature: -30 degrees to 60 degrees

Relative humidity: relative humidity ≤90%, no condensation

Features

1) The main control board of the movement: adopts the industrial-grade 32-bit ARM chip, leading the industry, with fast response speed and greatly improved processing capacity. Arc speed gate

2) Clutch device: use electromagnetic clutch device

3) Transfer angle: angle detection and control by angle encoder, accurate to within 1 degree

4) Movement mode: After swiping the card, the swing arm opens, prompting pedestrians to pass, and after the person passes, the swing arm automatically closes

5) Anti-reversal: anti-reversal, after swiping the card, only allow pedestrians to travel in one direction; if passing in the opposite direction, an alarm will be issued, and the swing arm will be closed quickly in some cases

6) Forced intrusion: If the swing arm is not opened, if you forcibly enter it, the swing arm will be locked immediately after rotating a certain angle for buffering. Cylindrical integrated speed gate

7) Speed adjustment: The speed can be adjusted according to the requirements of different places, with a built-in adjustment switch

8) Fire-fighting mode: After the power is off, the product swing arm opens to form an open channel

9) Counting function: accurate counting, thanks to the use of angle encoders

10) Infrared detection: 4 pairs of infrared detection are used to judge various traveling states

11) Automatic reset: After obtaining the gate-pass permission, if there is no gate-pass within the set time, the gate will automatically cancel this permission and restore to the initial state

12) Noise: almost no noise

13) Power module: output: DC24V; using a brand-new power module, no change in output voltage caused by changes in input power, stable and reliable

14) Motor: DC24V 30W

15) Compatibility: It has a personalized installation interface, compatible with various smart cards such as IC and ID cards, and can be expanded into an automatic identification system to achieve access control, attendance, charging and other functions. It can be used in conjunction with other types of channel products

16) Others: waterproof, sunscreen, cold resistance, high temperature resistance. Cylindrical speed gate