Daily maintenance of anti-collision swing gate channel

During the use of the swing gate channel, improper maintenance may cause some unnecessary troubles. Then, how should the swing gate be routinely maintained? Let's follow the editor to take a look at the maintenance knowledge of the swing gate, so that the swing gate can operate longer and more securely.

Swing gate case maintenance

Daily maintenance and maintenance of the swing gate case The swing gate and wing gate case are sprayed or painted by 304 stainless steel and electrolytic plate (A3 board). Rust spots will appear on the surface of the stainless steel case for a long time. You can use sandpaper, green gauze and fossil powder to remove The chassis should be cleaned, and the sanded surface should be rubbed along the long grain (maintain the thick grain direction), otherwise it will affect the appearance of the chassis. Polish the mirrored surface with a polishing wheel and polishing wax. If possible, apply some anti-rust oil on the surface. Use a soft cloth to wipe off the dust on the sprayed or painted chassis. If there are scratches on the surface, you can use the same color paint to make up. Remember not to paint the area of the radio eye. Once it is covered, place it. The gate and the wing gate will alarm by mistake, which constitutes unnecessary trouble. Channel swing gate manufacturers

Swing gate movement maintenance

Before maintenance, the swing gate should cut off the power supply, open the cover, clean the surface dust, spray some of the drive with butter, remove the motor, apply butter to the gear and wheel groove, and fix the motor in the original position. Check whether the connecting piece screw is loose, tighten it, and do not adjust the limit switch and limit metal piece at will. The 1-2mm of the open space is too far away to be sensed, and it is too close to be damaged. Channel swing gate　

Swing gate power supply maintenance

Cut off the power supply of the swing gate channel gate, remove the surface dust, check whether the plug-ins are loose, plug them in, tighten them, do not randomly replace the wiring position, whether the external power supply is exposed, and the exposed conditions should be wrapped up in time, whether it is leaking Condition, deal with it in time, refer to the manual, check whether the technical parameters of each end interface are normal, and replace the aging electronic components in time.　　 Swing gates and wing gates must be maintained by professionals, especially for the movement and electric control. The power supply is blocked first, and the safe operation must be professionally trained. Fully understand the strong current and defects before being able to operate. Stainless steel double channel swing gate

The above is the maintenance knowledge of the swing gate. For more information about the swing gate channel, please click the swing gate column under the product information to understand, and for more detailed product information, please click the swing gate under the product center to check.